COATING SYSTEM – 2 COMPONENT ALU EPOXY/PU – GLOSS

SPECIFY THE DESIRED COLOUR CODE IN THE “NOTES” DURING CHECK OUT

2 comp. Epoxy + 2 comp. Polyurethane

Kies verpakking
Kleur kiezen
  • Aluminium
-
+
Kies verpakking
Kies je kleurgroep
  • Stdd. White
  • Cat. White / Beige
  • Cat. Yellow
  • Cat. Orange
  • Cat. Red
  • Cat. Violet
  • Cat. Blue
  • Cat. Green
  • Cat. Grey
  • Cat. Brown
  • Cat. Black
-
+
Kies verpakking
-
+
Kies verpakking
-
+

Description

Application Procedure

Surface Preparation

  1. Clean the surface from contaminents such as oil, grease, salts & chlorides using a biodegradable degreaser such as Safeclean BIO 3, followed by a rinse with clean water
  2. Remove any loose rust, paint and corrosion by abrasive blasting, UHP waterjetting or power tool cleaning.

Paint Application

Apply by brush, roller or spray:

Layer Product Name  Generic Type Mix Ratio Min. Temp. Dry time @ 25°C m2/L brush m2/L spray Thinner
1st coat Intershield One 2 One 2  comp. epoxy primer 1 to 1 -5°C 4 hrs 7,80 5,20 n/r
2nd coat Interthane 990 2 comp. polyurethane topcoat 17 : 3 -5°C 6 hrs 10,26 6,84 n/r

Find the right application tools in the toolbox for solvent based coatings

Tips

  1. Do not apply or expose the paint below dew point, above 80% relative humidity, rain or temperatures below 10°C during application or drying.
  2. Make sure the mixing ratio is correct
  3. Wait at least 15min. after mixing before applying the paint
  4. Apply a stripe coat by brush on sharp edges, cavities such as pitting corrosion, in corners and difficult areas to reach by spray
  5. Do not overcoat a single component system with a 2 component system
  6. Respect to minimum and maximum overcoating time as per product data sheet

 

Always read the product technical data sheet and safety data sheet before using the coatings, to be found in the Download section.

Additional information

Weight 35 kg
Eindgebruik

, , , , ,

Merk

Industrie

Glansniveau

Onderdelen

Compatibel met

2 component

Substraat

, , ,

Budget - Laag (*) tot Hoog (*****)

***

Productiviteit - Laag (*) tot hoog (*****)

****

Kwaliteit - Laag (*) tot Hoog (*****)

*****

Surf M&R

, , , , ,

Surf Prep Nieuw Staal

,

UV-bestendigheid - Laag (*) tot hoog (*****)

Systemen

, , , , ,

Coating, lining of PFP

Marktsegment

Oplosmiddel

Laag

,

Soort product

,

Detailed information about COATING SYSTEM – 2 COMPONENT ALU EPOXY/PU – GLOSS

Intended usesFor maintenance on board above the waterline
Min. DFT150 µm
Typical DFT250 micr. DFT
Chemistry2 comp. Epoxy + 2 comp. Polyurethane

Downloads

Product name Document name Document type Language Download
COATING SYSTEM – 2 COMPONENT ALU EPOXY/PU – GLOSS PDS Intershield One 2 One Product Data Sheet English Download
COATING SYSTEM – 2 COMPONENT ALU EPOXY/PU – GLOSS PDS Interthane 990 Product Data Sheet English Download

Reviews

There are no reviews yet.

Be the first to review “COATING SYSTEM – 2 COMPONENT ALU EPOXY/PU – GLOSS”

Your email address will not be published. Required fields are marked *

Need Help?