Description
Carboguard 893 SG is a 2-component Zinc Phosphate Epoxy primer/finish designed for equipment. It provides long-lasting protection against corrosion and harsh environments.
Carboguard 893 SG is a Zinc Phosphate Epoxy primer/finish formulated for equipment protection.
Epoxy polyamide with corrosion inhibitor (zinc phosphate)
Carboguard 893 SG is a 2-component Zinc Phosphate Epoxy primer/finish designed for equipment. It provides long-lasting protection against corrosion and harsh environments.
Intended uses | Used either as a primer, intermediate coat, or self-priming finish over steel and zinc primers into typically C3 and C4 environments as per ISO 12944 |
---|---|
Volume solids | 63% |
VOC | As Supplied : 2.70 lbs./gal (324 g/l) gr/lt |
Max. DFT | 150 µm |
Min. DFT | 75 µm |
Theor m2/lt at average DFT | 8,3 m2/lt |
Typical DFT | 75 |
Min. consumption brush/roller m2/lt | 7,4 m2/lt |
Min. consumption spray m2/lt typical DFT | 5 m2/lt |
Drying time (25C) | 7 hrs |
Drying time (10C) | 24 hrs |
Drying time min. temp | 24 |
Min. application temp. | 50°F (10°C) |
Max. operating temp. | Continuous: 300°F (149°C) |
Chemistry | Epoxy polyamide with corrosion inhibitor (zinc phosphate) |
Reviews
There are no reviews yet.