High Temp. Resistant – Thermaline 450 EP – CUI resistant Phenolic Epoxy – Equipment

A high performance immersion-grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures. It is typically used on hot steel substrates under insulation operating continuously up to 400°F, 204°C. It has excellent chemical resistance properties to handle the corrosive effects of wet insulation under thermal cycling conditions. This coating is recommended for NACE SP0198 Standard Practice for coatings to control corrosion under insulation (CUI) system numbers CS-1, CS-3, CS-4, SS-1, SS-2, and SS-3.

Epoxy Phenolic-Novolac Blend

Excellent Corrosion under insulation (CUI) resistance
High temperature resistant (continuous & cyclic)
High DFT tolerance for phenolic
Resistant to steam out
Low VOC

Pick Color

Grey
Red

Choose Packaging

Clear

SKU: N/A Categories: Industrial Equipment, Insulation, Protective Coatings Tags: 2340, high temperature resistant, insulated pipe, Interbond 2340UPC, intertherm 228hs, jotun epoxy hr, mechanical equipment, phenolic, phenolic epoxy, pipeline, Piping, UPC, valves

Description

A high performance immersion-grade coating system which has excellent resistance to wet/
dry cycling conditions at elevated temperatures. It is typically used on hot steel substrates
under insulation operating continuously up to 400°F, 204°C. It has excellent chemical resistance
properties to handle the corrosive effects of wet insulation under thermal cycling conditions. This
coating is recommended for NACE SP0198 Standard Practice for coatings to control corrosion
under insulation (CUI) system numbers CS-1, CS-3, CS-4, SS-1, SS-2, and SS-3.

Additional information

Weight	N/A
Product type	High temperature resistant
Coating, Lining or PFP	Coating, High Temperature Coatings
Market Segment	O&G Midstream, Oil & Gas Upstream, Petrochemical, Power – Thermal Fuel, Pulp & Paper
Brand	CARBOLINE
Gloss Level	Semi-gloss
Components	Multi pack
Compatible with	2 component
Layer	Primer, Primer/finish
Pick Color	Grey, Red
Substrate	Carbon Steel, Primed Steel
Solvent	Solvent Based
Max operating temp	25°C, 40°C, 50°C, 50°C ≥ T < 90°C, 60°C, 70ºC, 80ºC, 90°C, 120ºC, 150°C, 180ºC, 205ºC
Industry	Industrial Coatings
Productivity - Low () to High (****)	***
Quality - Low () to High (****)	****
UV resistance - Low () to High (****)	**
Surf Prep New Steel	Sa2.5, Sa3
End Use	Insulated internal surfaces, Insulated storage tank
Choose Packaging	20L, 5L
Surf Prep M&R	FR Sa2.5, Solvent Clean SSPC-SP1
Equipment End Use	Actuators, Boilers, Bulk Valves, Burner, Coalescer, Columns & Towers, Compressors, Cooling Tower, Drier, Effluent, Exchanger, Furnaces, Gear Boxes, Heaters, HVAC, Hydrogen Production, Incineraor, Nitrogen storage & generation, Packaged Units, Reactors, Stacks & Flares, Subsea Equipment, Tank Storage, Thermal Oxidiser, Turbines, Vaporizer, Vessels & Drums
Pipe & Equipment End Use	Insulated Carbon Steel Piping & Equipment <205°C, Insulated Stainless Steel Piping & Equipment <205°C, Uninsulated Carbon Steel Piping & Equipment <205°C, Uninsulated Stainless Steel Piping & Equipment <205°C
ISO 12944 Environment	C3 Medium – Urban & Industrial atmosphers, low pollution or salinity, C4 High – Industrial or Coastal areas, tropical, moderate pollution or salinity, C5 Very High – Temperate and subtropical with very high pollution and/or significant chloride effects, Cx Extreme – Extreme industrial areas, offshore areas, Im 1 – Fresh Water

Detailed information about High Temp. Resistant – Thermaline 450 EP – CUI resistant Phenolic Epoxy – Equipment

Intended uses	Insulated valves, pipes and equipment made our to carbon or stainless steel, operating at high temperature
Volume solids	84%
VOC	As Supplied : 1.00 lbs/gal (119 g/l) gr/lt
Max. DFT	200 µm
Min. DFT	100 µm
Theor m2/lt at average DFT	8,3 m2/lt
Typical DFT	100
Min. consumption brush/roller m2/lt	7,5 m2/lt
Min. consumption spray m2/lt typical DFT	5 m2/lt
Drying time (25C)	12 hrs
Drying time (10C)	36 hrs
Drying time min. temp	36
Min. application temp.	50°F (10°C)
Max. operating temp.	205C
Chemistry	Epoxy Phenolic-Novolac Blend

Downloads

Product name	Document name	Document type	Language	Download
High Temp. Resistant – Thermaline 450 EP – CUI resistant Phenolic Epoxy – Equipment	PDS Thermaline 450 EP			Download

Reviews

There are no reviews yet.

Be the first to review “High Temp. Resistant – Thermaline 450 EP – CUI resistant Phenolic Epoxy – Equipment”

High Temp. Resistant – Thermaline 450 EP – CUI resistant Phenolic Epoxy – Equipment

Description

Additional information

Detailed information about High Temp. Resistant – Thermaline 450 EP – CUI resistant Phenolic Epoxy – Equipment

Downloads

Reviews

Customer support

Contact EN

PaintDeals.com

Recent posts

About PaintDeals

High Temp. Resistant – Thermaline 450 EP – CUI resistant Phenolic Epoxy – Equipment

Description

Additional information

Detailed information about High Temp. Resistant – Thermaline 450 EP – CUI resistant Phenolic Epoxy – Equipment

Downloads

Reviews

Related products

Carboline Carboguard 690 – Moisture Tolerant Epoxy | Pipe Coating

ISO 12944 – C5 / Cx High – 3 coat – 2C Epoxy Carbomastic 652 + 2C PU Carbothane 134HP

Primer/Intermediate – Carbomastic 652 – HS Epoxy Cold. Temp. Cure

Primer/Finish – Carboquick 200 – Fast A/C Polyaspartic – Colour