Interbond 2340UPC (20L) – Primer/Finish – High Temp Resistant Epoxy (205°C)

For use as an abarsion and impact resistant, anticorrosive primer/finish on insulated or non-insulated, carbon or stainless steel piping, valves and vessels operating between -196°C (-321°F) and 230°C (446°F).

Description

Interbond 2340UPC is a high temperature resistant epoxy primer/finish suitable for insulated or non-insulated carbon or stainless steel piping, valves, and vessels. It provides corrosion resistance according to ISO 12944-9 standards at ambient temperatures, delivering productivity savings compared to inorganic zinc silicate and traditional epoxy phenolic based systems. With alkylated amine epoxy technology, it offers extreme scratch and impact resistance, UV resistance, and prolonged heat resistance up to 205°C.

Additional information

Weight 1,31 kg
Choose Packaging

Brand

Pick Color

, , ,

Composition

Product type

Coating, Lining or PFP

Components

Compatible with

2 component

Layer

,

Substrate

, , ,

Solvent

Max operating temp

, , , , , , , , , , ,

Industry

ISO 12944 Durability

High, Very High

ISO 12944 Environment

, , ,

Productivity - Low (*) to High (*****)

*****

Quality - Low (*) to High (*****)

*****

UV resistance - Low (*) to High (*****)

Surf Prep M&R

, , , , ,

Surf Prep New Steel

Pipe & Equipment End Use

, , ,

End Use

,

Detailed information about Interbond 2340UPC (20L) – Primer/Finish – High Temp Resistant Epoxy (205°C)

Intended usesExternal protection for process pipes, valves and vessels operating between the temperatures of -196°C (-321°F) and 230°C (446°F). Suitable for use on both carbon and stainless steel in insulated or uninsulated conditions, as well as cryogenic service. Due to its superior high DFT tolerance, Interbond 2340UPC significantly reduces the risk of thick film cracking when compared to traditional epoxy phenolic coatings. Interbond 2340UPC eliminates the temperature and humidity requirements associated with inorganic zinc coatings resulting in better quality and productivity in all climates.
Volume solids60%
VOC390 gr/lt
Max. DFT200 µm
Min. DFT100 µm
Theor m2/lt at average DFT3,00 m2/lt
Typical DFT200
Min. consumption brush/roller m2/lt2,70 m2/lt
Min. consumption spray m2/lt typical DFT1,80 m2/lt
Drying time (25C)6 hrs
Drying time (10C)8 hrs
Drying time min. temp10
Min. application temp.-5ºC
Max. operating temp.?

Downloads

Product name Document name Document type Language Download
Interbond 2340UPC (20L) – Primer/Finish – High Temp Resistant Epoxy (205°C) PDS Interbond 2340 UPC Product Data Sheet English Download

Reviews

There are no reviews yet.

Be the first to review “Interbond 2340UPC (20L) – Primer/Finish – High Temp Resistant Epoxy (205°C)”

Your email address will not be published. Required fields are marked *

Need Help?