Intergard 5000 (20L) – 2 comp. – Primer/Finish – Damp Surface Tolerant

For use as a one or two coat system above and below the waterline.

Moisture Tolerant Epoxy



AkzoNobel International Paint’s Intergard 5000 is a light coloured, tar free, surface tolerant, universal primer with high volume solids (82%).

Intergard 5000 is alsotolerant of damp surfaces (see limitations section), and demonstrates excellent corrosion protection when applied directly to tight rust.

Intergard 5000 has very high impact and impact resistance as well as chemical resistance.


International Paint’s Intergard 5000 can be applied to virtually all areas of the vessel, including the vessel’s hull below the waterline, also as a primer for the antifouling system, as well as above the waterline on the sides, walkways, den, in the holds, bilges or engine room.

Intergard 5000 provides excellent corrosion protection applied directly to solid rust, is compatible with a wide range of existing coatings, can be applied to damp substrates, and is resistant to rainwater within 30 minutes of application at 25 degrees Celsius.

This makes International Paint’s Intergard 5000 the excellent solution for on-board maintenance.

Additional information

Weight N/A
Choose Packaging


Pick Color


Product type

, , ,

Compatible with

1 component, 2 component



End Use

, , , , , , , , , , , ,

Budget - Low (*) to High (*****)


Productivity - Low (*) to High (*****)


Quality - Low (*) to High (*****)


UV resistance - Low (*) to High (*****)

Coating, Lining or PFP

Market Segment


Surf Prep New Steel



, , ,

Detailed information about Intergard 5000 (20L) – 2 comp. – Primer/Finish – Damp Surface Tolerant

Intended usesAs a one or two coat system which can be applied directly to mechanically prepared shop primer or grit blasted,hydroblasted or mechanically cleaned surfaces.For use at Newbuilding, Maintenance & Repair or On Board Maintenance.
Volume solids82%
VOC220 gr/lt
Max. DFT350 µm
Min. DFT125 µm
Theor m2/lt at average DFT5,47 m2/lt
Typical DFT150 micr. per coat
Min. consumption brush/roller m2/lt4,92 m2/lt
Min. consumption spray m2/lt typical DFT3,28 m2/lt
Drying time (25C)7 hrs
Drying time (10C)16 hrs
Min. application temp.5°C
ChemistryMoisture Tolerant Epoxy


Product name Document name Document type Language Download
Intergard 5000 (20L) – 2 comp. – Primer/Finish – Damp Surface Tolerant PDS Intergard 5000 Product Data Sheet English Download
Intergard 5000 (20L) – 2 comp. – Primer/Finish – Damp Surface Tolerant 48843 Manual English Download


There are no reviews yet.

Be the first to review “Intergard 5000 (20L) – 2 comp. – Primer/Finish – Damp Surface Tolerant”

Your email address will not be published. Required fields are marked *

Need Help?