COATING SYSTEM – BILGES – 1 COMPONENT VINYL

SPECIFY THE DESIRED COLOUR CODE IN THE “NOTES” DURING CHECK OUT

2 Component Epoxy

Kies verpakking
Kleur kiezen
  • Aluminium
  • Black
-
+
Kies verpakking
Kies je kleurgroep
  • Stdd. White
  • Cat. White / Beige
  • Cat. Yellow
  • Cat. Orange
  • Cat. Red
  • Cat. Violet
  • Cat. Blue
  • Cat. Green
  • Cat. Grey
  • Cat. Brown
  • Cat. Black
-
+
Kies verpakking
-
+

Description

Application Procedure

Surface Preparation

  1. Clean the surface from contaminants such as oil, grease, salts & chlorides using a biodegradable degreaser such as Safeclean BIO 3, followed by a rinse with clean water
  2. Remove any loose rust, paint and corrosion by abrasive blasting, UHP waterjetting or power tool cleaning.

Paint Application

Apply by brush, roller or spray:

Layer Product Name  Generic Type Mix Ratio Min. Temp. Dry time @ 25°C m2/L brush m2/L spray Thinner
1st coat Intertuf 203 1  comp. vinyl primer n/a -5°C 8 hrs 4,80 3,20 GTA007
2nd coat Intersheen 579 1  comp. vinyl colour n/a 10°C 8 hrs 7,88 5,25 GTA007

Find the right application tools in the toolbox for solvent based coatings

Tips

  1. Do not apply or expose the paint below dew point, above 80% relative humidity, rain or temperatures below 10°C during application or drying.
  2. Apply a stripe coat by brush on sharp edges, cavities such as pitting corrosion, in corners and difficult areas to reach by spray

 

Always read the product technical data sheet and safety data sheet before using the coatings, to be found in the Download section.

Additional information

Weight 20 kg
Eindgebruik

Merk

Industrie

Onderdelen

Glansniveau

Compatibel met

1 component, 2 component

Substraat

, , ,

Budget - Laag (*) tot Hoog (*****)

*

Productiviteit - Laag (*) tot hoog (*****)

**

Kwaliteit - Laag (*) tot Hoog (*****)

****

Surf M&R

, , , , ,

Surf Prep Nieuw Staal

,

UV-bestendigheid - Laag (*) tot hoog (*****)

Coating, lining of PFP

Marktsegment

Oplosmiddel

Laag

,

Soort product

,

Detailed information about COATING SYSTEM – BILGES – 1 COMPONENT VINYL

Intended usesFor use above the waterline
Min. DFT115 µm
Chemistry2 Component Epoxy

Downloads

Product name Document name Document type Language Download
COATING SYSTEM – BILGES – 1 COMPONENT VINYL PDS Intertuf 203 Product Data Sheet English Download
COATING SYSTEM – BILGES – 1 COMPONENT VINYL PDS Intersheen 579 Product Data Sheet English Download

Reviews

There are no reviews yet.

Be the first to review “COATING SYSTEM – BILGES – 1 COMPONENT VINYL”

Your email address will not be published. Required fields are marked *

Need Help?